|
|
Post by leez1000r on Oct 12, 2020 21:18:05 GMT
My god u have been busy with the info,IDE love to workout how much I've lost of my bike........ My rizoma bar end mirror's wouldn't fit onto r&g barends so I had a pair made of aluminium,so there not stainless steel,as they needed to be 30mm
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 12, 2020 21:24:22 GMT
You have too much time on your hands.... Truth.  |
|
|
|
Post by leez1000r on Oct 22, 2020 17:22:40 GMT
Here it is bud... Attachments:
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 22, 2020 17:25:18 GMT
Cheers man. Wrong thread though.... |
|
|
|
Post by leez1000r on Oct 22, 2020 17:28:03 GMT
Yes it's labeled seat cow... Lol... As u can see it's the same one just different colour...  |
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 26, 2020 22:41:09 GMT
Exhaustive (ha) scientific research shows... The stock headers & cat = 7.28kgs Stock cans = 8kgs Stock mirrors and tail unit = 2.4kgs Barends = .28kgs Toolkit = .5kgs. So a total of 18.46kgs taken off (40.7 lbs) Set this against what I've put back on.. The entire lextek headers plus link pipes is 6kgs,I didn't need them so 5.2kgs. I need to weigh the Akra cans,tail tidy and barend mirrors,but I'd hope to have dropped off at least 8kgs (17.5 lbs) Doesn't seem like a massive amount so far! Adding to the list. Pillion hangers and fittings 1.5kgs. R&G hangers and fittings 0.5kgs. |
|
|
|
Post by leez1000r on Oct 27, 2020 13:50:55 GMT
I've shed some weight,but I could saiy how much, haven't a clue,I know what I've removed was heavyer than what I put on,my cans weigh next to nothing, titanium,and the bolts,tail tidy, iback indicators are gone,front I've replaced,and carbon fiber,no rear legs,an no rear resivour fitting,gone... But I couldn't tell u how much less it is,but I noticed it,from when I had it.... Much better....
|
|
|
|
Post by comfysofa on Oct 28, 2020 18:11:12 GMT
Whats the original weight....was it 210 or something like that?
Hopefully with my wheels mine'll be a bit lighter again.....ive got a quite a bit of Ti on mine too along with CF bits...theres a scrap yard down the road with a weighbridge.....reckon ill go down there and chuck'em a fiver
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 28, 2020 18:38:51 GMT
Whats the original weight....was it 210 or something like that? Hopefully with my wheels mine'll be a bit lighter again.....ive got a quite a bit of Ti on mine too along with CF bits...theres a scrap yard down the road with a weighbridge.....reckon ill go down there and chuck'em a fiver That's an odd one. Kawasaki lists the weight of a gen 4 as 221kgs,but the performance edition,which loses the rocket launchers,servo,etc is given the same weight. |
|
|
|
Post by leez1000r on Oct 28, 2020 19:04:13 GMT
Ide like to weigh mine,just to see.... Look at us all talking about Ower loved ones weight. It's like who's got the fattest bird there daiting,and who's the fittest babe... Ha!!! If only Ower other halves could read this 1....
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 28, 2020 19:33:41 GMT
|
|
|
|
Post by louisb on Oct 31, 2020 3:10:18 GMT
😂
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Dec 1, 2020 14:09:52 GMT
My bike weighs in at 207.35kgs that's 13.65 kilos,or 30 lbs less than stock. It's a start,I suppose. |
|
|
|
Post by trebor4460 on Dec 2, 2020 19:44:19 GMT
on a side note.. im dateing the fattest bird now at the moment although i have shaved around 15 pounds for the cannon.. and on the best bang for your buck weight saving... a lithium batry will save you 5lbs... and a better battery to boot.. |
|
skub
1000 RPM
Posts: 181
|
Post by skub on Dec 2, 2020 20:41:05 GMT
on a side note.. im dateing the fattest bird now at the moment although i have shaved around 15 pounds for the cannon.. and on the best bang for your buck weight saving... a lithium batry will save you 5lbs... and a better battery to boot.. I know man,but the practical side of me won't allow me to ditch a perfectly good battery*. I come from a generation that run batteries until they failed! *Just yet anyway! |
|
skub
1000 RPM
Posts: 181
|
Post by skub on Jan 2, 2021 21:55:12 GMT
Some R&G bungs fitted. That's another 0.48 kgs back on!  |
|
