Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 2, 2007 9:11:19 GMT
Hy every one i have just got a bell pan for my z750 from Ebay its a cheapo German thing but i can not get it to go on any one got any ideas plz help  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 2, 2007 14:29:14 GMT
Lister,
First is it designed for the z750 or another bike?
Mark
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2007 12:11:37 GMT
its defo for the z 750 it has sum of the same shape to it as the engine
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2007 12:26:58 GMT
If it`s for the z750, they should of sent you some Brackets for it to fit.
If you have`nt got any then I could get you some aluminium Flat bar and you could make your own ones.
Let me know. "I wouldnt want any money for the metal, all you would have to do is cover the cost of postage !"
Mark
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 4, 2007 9:11:38 GMT
i have sum brackets i just can not work out how thay go on
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 4, 2007 9:24:57 GMT
You should find that once you fix the brackets to the bellypan (loosely) the holes on the other end will line up there or thereabouts with some bolt/screw/fixing on your engine casings or somewhere.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 4, 2007 10:51:48 GMT
Yeah what he said ^^^
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2007 12:33:01 GMT
sounds good but i can not figer out witch ones go were and there is no bolts with it as i have just realised
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 7, 2007 11:44:25 GMT
Lister,
You wont have bolts with it for bike side, you will use the bolts that are already on the casings of your engine. But you should have four or so for bellypan side!!! There is probably only four brackets and they will only fit on One way so get your spanners out and get spannerin.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 8, 2007 9:06:06 GMT
i am going to try and use the boltes out of the belly pan that is on but ther is 6 bit of bracket and it is starting to do me head in i have had it 2 month now and still can not get it right
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 16, 2007 9:09:25 GMT
hi still having problem with belly pan still can not figure it out HELP
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2007 7:50:50 GMT
sorry mate but without seeing the pan and fittings in relation to the bike, it may be a little diffficult for us. If I lived nearer I would be more than willing to meet up to give you a hand figuring it out
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2007 9:05:25 GMT
thats ok u are realy far away
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2007 21:40:03 GMT
hi still having problem with belly pan still can not figure it out HELPJust bought a pan myself from 'fleabay'. Haven't fitted it yet as I'm going to get it sprayed to suit my bike's colour..........................................but..................it has come with all the fittings still attached, so MIGHT give you an idea of what goes where??? Have a look at the pictures on this link. photoextras.virginmedia.com/album/5620655 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2007 21:55:09 GMT
thats the stander one i have that one on now but i have got a different one it is a bit titer fitting
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2007 6:45:12 GMT
try contacting the seller again he my of forgotten to send you the instructions or send you a link on how to fit it,
good luck
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2007 12:03:40 GMT
tried thy will not even reply its strait from the factory in Germany i think
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 7, 2007 22:39:46 GMT
Saw those on ebay, wouldn't mind seeing a pic if you ever get it on
|
|
