Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 20, 2007 12:30:31 GMT
right i know this is a stooooopid question, but how the fook do you change the pads in the front? iv'e only ever had normal calipers  also any recomendations as to what to swap em for? i seem to be struggling to find a reference for sintered pads on the ebc site cheers |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 20, 2007 14:45:36 GMT
Well, I changed mine for EBC HH pads (some people seem to love em, and some hate em) and they took a bit to bed in but are better than the originals.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2007 14:15:28 GMT
You can get a disc on ebay with the manual on it for about 2 quid or if you send me your email address I'll send you it. It's about 10 MB so if you haven't got broadband it might take a while.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2007 14:22:32 GMT
Better yet look in the 'General' section under Manuals. Regan has a link there to Z1000 stuff but if you use the search facility in the link the 750 manual is in there.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2007 15:48:34 GMT
cheers guys  |
|
also any recomendations as to what to swap em for? i seem to be struggling to find a reference for sintered pads on the ebc site