|
Post by comfysofa on May 3, 2019 19:29:44 GMT
One of the lads on the .com forum was very helpful and sent over a solid works drawing for an alternative tail tidy. My brother has a 3d printer and did the honours. I'll be fitting it tomorrow... Looks a bit weird but should make it very "camera friendly" as it were...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2019 22:58:29 GMT
Lookin good comfy get them pics up soon as u can
|
|
|
Post by comfysofa on May 4, 2019 7:40:18 GMT
Later on hopefully....my rsv4 is in pieces waiting for an injector which should be here today....ill start after that...
|
|
|
Post by comfysofa on May 4, 2019 16:39:36 GMT
|
|
|
Post by comfysofa on May 5, 2019 15:01:53 GMT
Oh - just to add ive got one spare. if anyone wants it.....twenty quid - cost me 40 to have the pair done (just the cost of the ink). Pm me if you want it.
|
|
|
Post by comfysofa on May 10, 2019 18:24:34 GMT
Got an adjusted one with a slight tilt....will put some pics up in a bit.
|
|
|
Post by trebor4460 on May 11, 2019 9:19:24 GMT
looks real good, do you think the cops will cut some slack if they clock it? i mean you have got a number plate on back lol
|
|
|
Post by comfysofa on May 11, 2019 20:08:04 GMT
Well, this is the thing....passed in front of a paddy wagon last weekend - they could have followed but they didnt....if i look from behind from a car drivers view its not too bad....pardon the pun but the angle im going for is the speed camera angle....the advent of "smart motorways has forced my hand.....ive got no problem getting knicked for speeding if im actually speeding but im not taking it up the arse for 71, 72, 73 etc etc which it looks like thats the way its going...
Just to add to this ( as i was just thinking about it ) when was the last time someone actually got pulled over for speeding for example....unless your doing some breakneck speeds (100+) and generally behaving like a twat to other drivers, for me it was 20 years ago....they (the plod) i believe are getting lazy (to our advantage) - i think they now tend to let the technology do the job for them...its far easier to sit in the back of a van with a packed lunch and let the camera thin out the herd without having to lift a finger....or just press a button on a keyboard to lower the threshold for the gantry on the m5..easy.
To that end it'll make me feel a bit safer on the roads if for example im running with the speed of the traffic and a camera van harvests hundreds of riders/drivers in a day...
|
|
|
Post by louisb on May 13, 2019 7:15:43 GMT
Like this. Looks very Tidy. Wish it fitted my gen. My one has gone rusty as they do. Needs replacing or powder coating properly.
|
|
|
Post by comfysofa on May 13, 2019 7:18:07 GMT
It may fit....its just a square mounting point and very easy to drill...
|
|
|
Post by louisb on May 13, 2019 7:24:00 GMT
I will have closer inspection on mine when home. Would look ace and not rust!
|
|
|
Post by comfysofa on May 13, 2019 7:35:53 GMT
Yeah.... Or if you can take a photo and give me some measurements I might be able to adjust it...
|
|
|
Post by louisb on May 13, 2019 8:47:34 GMT
What size plate do you have on the comfy?
|
|
|
Post by comfysofa on May 13, 2019 8:59:52 GMT
A 9x7.
|
|
|
Post by louisb on May 14, 2019 5:10:24 GMT
Gonna measure today. Mine has the indicators on. Would need to get the tail light with them integrated also. Did look. Yours are integrated.
Think I am supposed to leave the stalks on as well if I have integrated tail light cluster
|
|
|
Post by comfysofa on May 14, 2019 19:47:24 GMT
Nah - shouldnt need to leave the stalks on...put some photo's up...the original drawing is in solidworks....i can get one of the lads to adjust it then print it out...so itll look like it was made for it...
|
|
|
Post by louisb on May 15, 2019 20:29:45 GMT
I did try getting a integrated before and it didn't fit right. The spacing was all off
|
|
|
Post by comfysofa on May 15, 2019 20:32:35 GMT
Take a photo of where the tail tidy would bolt to...ive got access to a cad program so i can adjust what ive already got and then print it out...
|
|
|
Post by comfysofa on May 15, 2019 20:36:14 GMT
If you can send me what youve got i can do a bang on accurate version...
|
|
|
Post by louisb on May 15, 2019 20:36:26 GMT
😁👊👍
|
|