|
Post by comfysofa on Apr 27, 2017 8:00:35 GMT
As above. Got mine mapped when i had a twin exit system with the brawlers. Since then a bit has changed and, hopefully this will be it for the changes. Drilled the airbox, changed from a twin exit system to a single and in turn switched to a crt end pipe. Texted Chris the dyno guy last night and he confirmed what i kinda knew...needs to go back on the dyno...so once thats done (hopefully this month) ill throw up some before's and after's.
|
|
|
Post by keef666 on Apr 27, 2017 11:03:57 GMT
How much does it cost to have a dyno test/run etc?
|
|
|
Post by comfysofa on Apr 27, 2017 12:09:06 GMT
Not had a price back yet but hoping a couple of hundred as ive been there so many times...! plus alot of the other stuff is already done (o2 delete, flapper delete, engine cut of and injector cut in).
|
|
|
Post by trebor4460 on May 1, 2017 19:10:44 GMT
good luck with it, be interesting to see if he can squeeze any more ponies out with the single exit and air box mod
|
|
|
Post by comfysofa on May 4, 2017 14:04:41 GMT
Yip - the other reason is i may break from tradition and take the zed to the TT this year so i want it as good as it can be.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 8, 2017 8:29:37 GMT
Hi, new on this forum, i see you have gone for 4-1, was this an easy do or did you change the headers, if so which did you use? cheers Shane
|
|
|
Post by comfysofa on Jul 8, 2017 16:46:48 GMT
Arrow race headers. Used to have a dual exit system but switched to a single exit. Yes, very easy to change.... Bit fiddly getting in to the front of the cylinder head though... The arrow single exit system doesn't come with a rear mount under the engine like the dual system does so I had local welder add that in so I don't need a strap to hold the tailpipe.... Which, is from an rsv4 and shortened.
|
|
|
Post by comfysofa on Aug 1, 2017 9:15:48 GMT
Going back in on friday for remap.....
|
|
|
Post by comfysofa on Aug 2, 2017 19:14:27 GMT
Cancelled til the 18th....ill get it there one day...!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 8, 2018 21:27:13 GMT
How much does it cost to have a dyno test/run etc? Its £320 for a remap and a couple of dyno runs at CJS which is near Bath...
|
|
|
Post by comfysofa on May 10, 2018 7:16:36 GMT
Yep - CJS is about 15 mins away from my house. Theyre out in the sticks a little bit but if you come down then i can take you there (assuming im free of course...should be) - met one of the other lads off here a couple of years back and got him there...
|
|
|
Post by louisb on May 12, 2018 14:53:07 GMT
I will get there one day also!!! 👍
|
|