Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 8, 2013 21:43:29 GMT
hi all quick question. i have stripped down the bike to spray it and on putting the rear back together my rear light wont light up on ignition on or come on when brakes are pressed ? any ideas also my number plate light does come on either ? i have made sure they are connected properly and they are and help would be much appreciated.
cheers
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2013 4:20:11 GMT
Hi,
First remove and reconnect the connections and bulb...make sure there is no corrosion. Also check the fuse. If they are ok then check the block connector for power with a meter and from the switch side as well. Also if you removed any earths, check them and also make sure they are getting a good connection to the frame.
If it worked before the bike was stripped, then i'm sure it will be something silly.
F
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2013 16:26:03 GMT
it was a fuse thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2013 19:22:43 GMT
Glad you sorted it m8 Thanks for letting us know as well F
|
|