Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 17, 2012 15:04:25 GMT
hi im new to this so here goes i have a z750 l3 and when the fuel tap is on the position hes over fueling on the one carb out of the over flow pipe we have cleaned the carbs with no success any help would be great if poss
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 17, 2012 18:52:45 GMT
Hi there Taffyleng,
First of all....welcome to the forum.
Secondly and most importantly.......this is a 2003+ Kawasaki Z1000/Z750 forum and not for older 1980's Kawasaki Z1000/Z750 aircooled 8 valve models.
With regards to your issue.....I would remove your carbs, remove the float bowls and clean everything, remove all the jets and blow through with an airline and carb cleaner spray then reassemble. Normally fuel running through carbs is caused by a blocked jet or sticky float. If this doesn't rectify the problem then buy a fuel tap repair kit and strip and replace the parts of the fuel tap with those supplied in the kit.
After that.....if no joy, you might be looking at replacing something.
F
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 17, 2012 21:22:32 GMT
ok sorry didnt no thanx for the info
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 17, 2012 22:08:57 GMT
That's ok ;D You're not the first and won't be the last  Hope you sort out your problems. Try Zpower if you need anything for your bike. The guys there are very knowlegeable and the range of parts they have is impressive. They can be found here: www.z-power.co.uk/merchantmanager/ (just click the link) F |
|
