Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 1, 2008 23:14:17 GMT
How do I adjust the cables on the throttle?
How did you sort yours (any input would be very welcome).
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 2, 2008 17:12:08 GMT
You have one adjuster for each cable where they come out of the switch cluster on the handlebars. These only give you a little bit of movement. The better option is the two adjusters you will find to the left of the headstock. There is a knurled tube affair with a knurled locking wheel at one end. Undo the wheel and turn the tube until you get to where you want to be. Turn the bars lock to lock a couple of times and make sure the revs stay stable then tighten up the locking wheels.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 3, 2008 21:18:35 GMT
cheers marco. sorted out now and even turned the tickover up a bit.soooo much better now.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 23, 2008 2:30:53 GMT
Even sorted the throttle snap return cable now. now my braking and turn in is lots better. I cant believe I have done nearly 7000 miles with engine braking like a twin!. Had it far too tight and the bike would really dive after hard acceleration and shut off.
Its like a different bike.
|
|
