Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 8, 2008 20:48:54 GMT
sorry another question can i use any axle from a 2003 b1h onwards for my 2005 c1h forks?
thanks all these questions are getting embarasing !!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 8, 2008 20:59:22 GMT
Hi Mate Yes it fits. the only difference is the B1/2H spindle has a 17mm allen key hole on one end where the C1/2/A6H has the Big 22 mm (or whatever it is at both ends. I presume it was to save weight. they are both the same length. Regards Rick  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 8, 2008 21:03:47 GMT
Just that........... when you get to a tyre bay if you Go and get yours done by a tyre bay then they will usually have a 17mm against a 22mm, I struggled first couple of times coz the boys I used to use didnt have a key big enough?  ? I ended making em all a key from 7/8" Hex Stainless and filing down the flats! DOH... PS. RICK Wheres your Avater Gone mate? and are you coming to the Ace on the 20th? |
|
? I ended making em all a key from 7/8" Hex Stainless and filing down the flats! DOH...