|
|
Post by zrick on Mar 23, 2008 14:36:15 GMT
Hi ,well ive cured my arking coils like this , u need some large shrink wrap ,replace the old plastic covers with it ,i got mine from m8s in elec board so if any 1 needs some contact me i have loads, its good 4 all sorts reparing hoses etc, u need to file down the cover once on as its very slightly thicker than standard cover its very minor but takes some time to do but it saves £80.00 a coil .I would like to here from any 1 who has had the same problem ,or may be its rare but ive got a cheep cure 4 it .hope to here back soon .
|
|
|
|
Post by andy on Mar 24, 2008 11:39:33 GMT
Do you think it would be worth doing as a precaution ? How much do you want for four bits mate ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 24, 2008 11:57:21 GMT
Hi Zrick Got any piccies of what we need to do mate as one of mine has started arcing recently. got to take a look at the others soon on my spring service which i will perform this month. Regards Rick  |
|
|
|
Post by zrick on Apr 2, 2008 20:11:11 GMT
Do you think it would be worth doing as a precaution ? How much do you want for four bits mate ;D yes its worth keeping some in definately i can sell u a 1m length 4 £10.00 if u like itll a few coils or half a length 4 £5.00, u only need 4 4in lengths but u will need to rubb it down afterwards with sand paper i done mine with a file b4 uve fitted it cos they r slightly thicker than standard skin all most unoticeable till u fit it, its tight . u can call me on 07912076125 it will b easyer to explain |
|
|
|
Post by zrick on Apr 2, 2008 20:13:24 GMT
Hi Zrick Got any piccies of what we need to do mate as one of mine has started arcing recently. got to take a look at the others soon on my spring service which i will perform this month. Regards Rick hi best thing m8 is read wat ive wrote 4 andy above or & call me 07912076125 |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2008 20:15:28 GMT
this thread needs moving to For Sale as it's not technical info at all  it's a sales thread  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2008 23:37:24 GMT
;D+1 ... 1m of shrinkwrap for a tenner, you're avin a laugh  This time next year Rodney |
|
|
|
Post by zrick on Apr 17, 2008 16:46:19 GMT
go & buy 4 coils then £85.00 each or try & get wat ive got m8 ,i had to buy it so why should i give it to u, its a cheap cure & it works .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2008 18:36:03 GMT
 presuming from that reply that you were genuinely suggesting a cheap cure for a manufacturing fault (not unknown with Kwak's) Then please accept a thousand humble "Toseland's" and may your Zed forever run sweet. And if mine starts arcing then I'll do the same as you, as it is great stuff for all sorts of applications, and I get it free too, BUT .. a tenner ! it aint that dear even off fleabay
|
|
|
|
Post by zrick on Apr 27, 2008 10:28:47 GMT
u show me ware u can get the same stuff off ebay ,remember this is abouts 25mm diameter,cos ive never seen it only small stuff for wires
|
|
|
|
Post by zrick on May 1, 2008 21:10:29 GMT
well im disapointed at peoples attidude on here lol ive found a way to save £340.00 4 4 coils n i get accused of using it as a sales thread lol buy some twisted miserable git ,ive found this out my self & didnt need to share the advice but i have & hope some of u find it usefull, it works ive proved it 4 my self for a while with no probs at all, all i can say is bollox to any 1 of u who have a problem with me selling a length of 25mm shrink wrap to help cure a problem lol i paid 4 mine so there u go i have to get it from some 1 then send it to who ever so there u go lol
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 1, 2008 23:12:27 GMT
Come on!
I can't believe that you are still trying to sell in this thread.
THIS IS THE TECNICAL INFO SECTION.
YOU NEED TO GO TO THE FOR SALE SECTION.
nothing to do with prices etc
your in the wrong section as your not trying to help us with Tech info.
your trying to sell something.
this section is for sharing Z tips & helping other members.
Regards
Rick
|
|
presuming from that reply that you were genuinely suggesting a cheap cure for a manufacturing fault (not unknown with Kwak's) Then please accept a thousand humble "Toseland's" and may your Zed forever run sweet.