front sprocket removal

[kentsclan]

hello
ive got a new front sprocket to fit to my z750 2007 14 tooth -1

Any way
on the nut i can fit a 27 mm or a 1 1/4 it has 2 x holding points
but the blody thing is tight
at the moment i have the bike on padock stand a bar through the rear wheel resting on the swing arm protected with rags

is the above ok dont want to break anything

i have tried to undo the nut using a torque wrench no joy so i off out to get a big breaker bar and a 6 sided 27mm for good measure

just wana know if the method i am using is correct

[Deleted]

Thats exactly how I got mine off. I used an old fork leg as an extension for the socket wrench.

[kentsclan]

All Sorted

Brought a breaker bar and a 6 sided socked job done

just goes to show you how easy it is with the correct tools

Now for the test ride