Hi pal,
Anyone ever heard of "Techlusion"
thinkin of good price tho...
Techlusion Fuel Injection Control Module
By Techlusion Performance Group
The Fuel Injection Module Anyone Can Use And Anyone Can Afford
The TFi was designed and developed to provide an affordable solution to increasing the “fun factor” or ridability of your motorcycle. With today’s pollution regulations, many if not all of today’s motorcycles are setup extremely lean to meet these regulations. Unfortunately they are not always the best setup for performance or ridability. Therefore, adjusting the air fuel ration on these machines is essential to achieve optimum performance and ridability.
This is especially true when adding aftermarket performance products such as exhaust systems and air induction kits. The TFi Fuel module is completely adjustable allowing you to maximize horsepower, improve throttle response and eliminate backfire problems associated with installing aftermarket exhaust systems. TFi is different from other systems on the market in its method of adjustability by dealing directly with the fuel injection signal after it leaves the Factory ECU.
• Eliminates the need for expensive Factory Re-Mapping
• Increases Horsepower
• Improves Throttle Response
• Eliminates Backfire
• Completely Adjustable/Tunable
It adjusts your fuel requirements without tricking sensors or modifying the factory settings, which can limit the ECU’s effectiveness at compensating for changing atmospheric conditions.
Finally, an easy and affordable way to adjust your fuel injection system to accommodate modifications to your motorcycle’s exhaust system, air cleaner, or engine components.
The TFi is load based. Aside from reading throttle position and R.P.M., the TFi also takes into account the load the engine is under. Even though you may encounter the same throttle positions at the same R.P.M.s in different riding situations, the engine’s fuel requirement will not be the same because the engine is not under the same load.
The TFi module allows you to tune the fuel injection much the same way you jet a carburetor.
• The green “pot” functions like the fuel mixture screw and pilot jet on a carburetor to adjust light throttle operation through highway cruising and steady throttle.
• The yellow “pot” functions like an accelerator pump on a carburetor. It adds fuel as the throttle is opened.
• The red “pot” functions like a main jet on a carburetor to add fuel on top end.
• The RPM “pot” adjusts at what R.P.M. the green and yellow fuel addition stops and the red fuel setting takes over.
The TFi module includes Scotchlock connectors which allow you to quickly and easily splice into your stock wiring harness.
thinkin of good price tho...