Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 3, 2018 14:53:22 GMT
Hi all I have R&G crash bungs already fitted to my 06 Z1000 but I can turn them by hand, so I'm thinking loose engine mounts. So my question is do I tighten the bolt through the crash bung from the front, or is it a nut on the back I have to tighten. Any help would be great.
|
|
|
Post by maxz1000 on Feb 5, 2018 18:47:59 GMT
I think try either, if it does not bite and tighten you may need to have a tool on both sides. Let us know how you get on.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 5, 2018 20:27:30 GMT
Ok thanks max not sure if the nut is in its own little hole, will have a look when I get 2mins.
|
|