Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 28, 2009 21:20:18 GMT
Just bought an 03 z1000 with 13k on the clock . under 4000 rpm it seems to be completely gutless but as you increase the revs it seems to clear its throat and get going but i feel not to its full potential. i was going to buy a power commander but don't want to spend the two and a half hundred quid if the problem lies somewhere else . bike is fitted with akraprovics without baffles ,a mate seems to think this is where my problem lies but I'm not convinced as its a complete lack of power not just a flat spot. bike is also supposed to have a k+n filter but i haven't had chance to open the air box to check ,for the same reason i also don't know if the air box mod has been done. At the moment my old bandit is wiping the floor with it so any help would be much appreciated. thanks Stu
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2009 16:17:55 GMT
Your Problem lies with the cans.......You need a PC3 and an hour on the dyno!
It will definately sort your problem out.....Also what i did was fit a 15t ZX9 front sprocket to quicken things up a bit!
Mark
|
|