Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 10, 2009 15:51:31 GMT
Hi I have a 2008 z1000 I bought it with a full akrapovic full exhaust system complete with power commander fitted it also came with the standard exhaust system. now I have removed the akro and the power commander and put the bike back to standard again because I fancied a change now this is where my problems have started. there is no lambda sensor on the downpipes and it is completely missing so I have fitted the akro plug on the downpipes but have the fi light flashing I have fitted the cables back on and as far as I am aware this should be ok unless there is a set postion they need to set at on the little motor by the tank etc. I understand I need to either get a secondhand lambda sensor but can't find one as yet or buy a o2 eliminator which are not available at the moment. any advice really on what the exup valve should be set at would appriciated plus anyone out there got a lambda sensor or o2 eliminaor or another way of getting around it would be good. cheers jedibike
|
|