Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 3, 2008 19:12:53 GMT
Hi Folks
My bike is due its MOT tomorrow morning, I have noticed that the headlight while on dipped beam shines quite high, can anyone tell me where is the adjustment screw?
I can see it anywhere.
Thanks folks
Monki
|
|
|
|
Post by kentsclan on Aug 3, 2008 21:03:42 GMT
is it the new gen or old
if new gen put a philips screw driver up from under the cowl
the screw driver slots in to a groove and just turn
it right in the centre of the cowl at the bottom
if old get put streening on full lock think its 10mm socket you need
large extention
i belive nut is also towards the bottom
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 4, 2008 8:39:59 GMT
Damned thing, I could'nt find it so I sent the bike in antways and we will see what the guy says.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 4, 2008 11:12:13 GMT
I am happy to report that the Z passed with flying colours……for some reason I feel others want to know my tedious news!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 9, 2008 0:08:06 GMT
Congratulations!!  Incidentally, my Z1000 (2007) adjusts by bolt on rear of the unit, not a screw underneath, so that must just be on the 750?! |
|
|
|
Post by kentsclan on Aug 10, 2008 9:42:32 GMT
Congratulations!! Incidentally, my Z1000 (2007) adjusts by bolt on rear of the unit, not a screw underneath, so that must just be on the 750?! yes it is a bolt but if you look at the bolt there is a v shape under it plastic v behind the bolt head there is teath so if you put a screw driver from inder the cowl it adusts |
|
