Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 25, 2008 15:01:37 GMT
OK, so back from the long trip up North. DynoJetUK put my 07 Z750 through its paces. I have modified the airbox, added a K&N airfilter, and of course the Mivv Suono end can. Two maps were made, with and without baffle. These will be made available on their wesite in about two weeks. With Baffle; 98.31 BHP/54.98ft lbs torque Without; 103.01 BHP/56.41 ft-lbs torque Small video here; In terms of performance, well I think the graph speaks for itself. The pull between 4-8k is increadible and very smooth. It's a little rough from idle to about 3.5K rpm, but I expect this.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2008 13:47:42 GMT
Impressive output for a 750 non sports bike tbh and at the wheel too. Show that to all the 600 Bandit/Fazer and Hornet punters ;D
|
|
|
Post by kentsclan on May 26, 2008 15:25:33 GMT
ive been waiting to see some 1 post up a new z750 with dyno nice 1
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2008 16:22:18 GMT
Anyone know what they are standard at the wheel?
|
|
|
Post by kentsclan on May 26, 2008 17:43:23 GMT
Anyone know what they are standard at the wheel? Mcn say Power 104.5bhp but that must be at the engine think you loose abount 8 ish to the wheel so say 96.5 at the wheel std
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2008 19:30:02 GMT
sounds real good mate,nice pipe.
|
|