Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 10, 2008 13:36:47 GMT
Hi
Can anyone help me with torque sttings for all the nuts and bolts on the rear suspension linkages:
1) Top of shock to frame 2) Bottom of shock to linkage 3) linkage to frame 4) Linkage to dog bones 5) Dog bones to swingarm
I have new dog bones and a 636 C1 shock to go on
Cheers! Jezz ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 10, 2008 15:25:08 GMT
Hi Jezz
Copy & paste from Manual!
Rocker Arm Installation •Apply grease to the inside of the needle bearings and oil seal lips, and add grease to the grease nipple. •Tighten:Torques -
Rocker Arm Bolts: 34 N·m (3.5 kgf·m, 25 ft·lb) Tie-Rod Nuts: 59 N·m (6.0 kgf·m, 43 ft·lb = dogbones) Shock Absorber Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb)
Regards Rick
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 10, 2008 16:32:04 GMT
Thanks Rick!
Great help mate! Have some Karma
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 11, 2008 1:14:01 GMT
Hi Jezz Copy & paste from Manual! Rocker Arm Installation •Apply grease to the inside of the needle bearings and oil seal lips, and add grease to the grease nipple. •Tighten:Torques - Rocker Arm Bolts: 34 N·m (3.5 kgf·m, 25 ft·lb) Tie-Rod Nuts: 59 N·m (6.0 kgf·m, 43 ft·lb = dogbones) Shock Absorber Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb) Regards Rick great reply mate. worthy of the karma in my book
|
|