skub
1000 RPM
Posts: 181
|
Post by skub on Oct 19, 2020 20:26:47 GMT
An Ermax jobbie. Loses the pillion seat which I won't ever use and tidies up the rear. Things I don't like. Although it came painted the correct colours,the black is gloss,whereas on my bike it's satin/matt. Any ideas on taking off the shine without it looking like it's been scoured? The fit required a bit of work and I needed to use a couple of pads under the front to prevent it marking the side panels.  |
|
|
|
Post by trebor4460 on Oct 20, 2020 19:13:11 GMT
looks good, link .. a link on a how too.. |
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 20, 2020 19:47:16 GMT
looks good, link .. a link on a how too.. Good stuff man,I'll be trying that. Ta very much.  |
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 20, 2020 20:26:28 GMT
Removing the strap seen on the rider's seat,make the fit much better too.
|
|
|
|
Post by leez1000r on Oct 21, 2020 17:53:23 GMT
I bought the same for mine,check me earlier post about it,the lugs broke off. They were good sent me a replacement one free of charge,but the lugs on that one are now breaking of,I'll relate it.... Just keep an eye on it bud,looks nice....
|
|
|
|
Post by leez1000r on Oct 22, 2020 3:28:15 GMT
I moved my strap so it went across the top,so I've got something to grip when putting it on a rear paddock stand,ever little helps... But it's always up to the individual of cause...
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 22, 2020 15:25:09 GMT
I bought the same for mine,check me earlier post about it,the lugs broke off. They were good sent me a replacement one free of charge,but the lugs on that one are now breaking of,I'll relate it.... Just keep an eye on it bud,looks nice.... Where did the lugs break on your cowl? Just to keep an eye. |
|
|
|
Post by leez1000r on Oct 22, 2020 16:36:16 GMT
The 2 that locate into the bike,I put a picture on this seat cowl blog,take a look....
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Oct 22, 2020 17:13:51 GMT
The 2 that locate into the bike,I put a picture on this seat cowl blog,take a look.... Where can I see the pic? |
|
skub
1000 RPM
Posts: 181
|
Post by skub on Nov 7, 2020 15:02:27 GMT
Finished article. Actually looks better than the pic.  |
|
|
|
Post by leez1000r on Nov 7, 2020 15:59:41 GMT
Looks very nice.... Did u get that pic of the lugs on mine,just so u can keep an eye on them bud.... But looks much better than the seat....
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Nov 7, 2020 17:49:46 GMT
Yeah,I did. Ta for that.
I tried to improve the fit to relieve the pressure on the lugs,maybe make them last a while longer.
|
|
|
|
Post by comfysofa on Nov 8, 2020 15:55:39 GMT
Very nice skub. Ive got no use for a seat cowl on any of mine as id say (80% of the time im riding with a bag) - i use a Kriega courier bag....i loosen the stap so it sits on the rear seat (means i can carry heavy stuff if i need to) without it taking its toll on my back...although ill remove the strap - thatll make it look tidier...
|
|
skub
1000 RPM
Posts: 181
|
Post by skub on Nov 8, 2020 18:15:24 GMT
Kriega make good gear. I've had one of their rucksacks for many moons. One of the few products you need to buy only once.
|
|
|
|
Post by comfysofa on Nov 8, 2020 18:18:54 GMT
Yep - i am, a Kriega whore.....got loads of other stuff too....
|
|
