Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 16, 2007 19:08:34 GMT
Hi I've got a 2005 Z750 and i want to change the spark plugs, on my old bike i could get to the plugs without fully taking the fuel tank off, can i do the same with this bike.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 17, 2007 17:34:15 GMT
No chance. To get at the two in the middle you have to remove the tank and undo several electrical connectors, undo the bolts holding the thermostat housing arse about for half an hour skin several knuckles say a lot then look forward to the same process the other way round. Have fun.
|
|
|
Post by andy on Sept 18, 2007 11:38:18 GMT
No chance. To get at the two in the middle you have to remove the tank and undo several electrical connectors, undo the bolts holding the thermostat housing arse about for half an hour skin several knuckles say a lot then look forward to the same process the other way round. Have fun. An honest answer there I think ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 18, 2007 17:53:23 GMT
Great its the hard way then with my last bike I could put string through the hole for the bolts on the back and front of the tank and tie it to the garage roof giving a foots gap to get in and do the work without totally taking the tank off Is the tank on the Z750 just held on with the one bolt under the seat ie undo that and just lift it straight up?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 19, 2007 17:36:05 GMT
Have a look at the 'Fuel Tank removal' post.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 1, 2007 15:10:27 GMT
Useful tip No. 1
removing the tank is a lot easier when its not full of juice, so plan to change your plugs when your tanks nearly empty
cheers
Dom
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 1, 2007 15:30:23 GMT
also protect the edges of the tank as they chip very easily when you lift the tank up, as I have found out!
|
|